1200KW / 1500KVA Prime Rating 3 Phase Diesel Generator With Yuchai
Engine
Operating conditions of generator set:
1. Altitude: ≤1500 m.
2. Ambient Temperature: -15℃~50℃.
3. Relative air humidity: ≤90%.
4. The site can't has electric conduction dust and corrosive gas
that destroies metal insulation.
5. The site can't has explosion danger.
Generaor Set Specifications:
| Genset Model | SYF1650-3 |
| Prime Power | 1200KW/1650KVA |
| Rated Voltage | 400/230V |
| Frequency | 50Hz |
| Power Factor | 0.8(lagging) |
| Dimension (L×W×H) (mm) | 5560×2330×2670 |
| Genset weight (kg) | 12000 |
Engine Specifications:
| Diesel Engine |
| Brand | Yuchai |
| Model | YC12VC2070-D31 |
| Number of Cylinders | 12 |
| Rotating Speed | 1500RPM |
| Cylinder Arrangement | 60º Vee form |
| Cycle | Four stroke |
| Aspiration | Turbocharged after water-cooled |
| Bore×Stroke (mm) | 200 x 210 |
| Displacement (L) | 79.17 |
| Compression Ratio | 14.5:1 |
| Fuel Injection | Electronic |
| Cooling System | Water-cooled |
| Speed Stability (%) | ≤5% |
| Lube Oil Capacity (L) | 280 |
| Fuel Consumption at 100% Load (g/kw.h) | ≤195 |
| Starting Method | DC 24V Electrical starting |
Alternator Specifications:
| Alternator |
| Brand | Faraday |
| Model | FD7B1-4 |
| Excite type | Brushless self-excited AVR regulation |
| Connecting type | 3 phase 4 pole |
| Steady frequency change | 0.50% |
| No load voltage | ≥95%-105% |
| Steady voltage | ≤±1% |
| Insulation class | Class H |
| Protection grade | IP23 |
Control Function
Key start / auto start
Monitoring meters: Current; Frequency; Wire Voltage; Genset KVA;
Genset KW; Output
Capacity; Output KW.H; Power Factor.Warning/Shutdown: Alternator
Under/Over Volts, Frequency; Under/Over Speed; Low Oil Pressure;
High Engine Temp; High/Low Battery Volts; Over Current; Earth Fault
Shutdown.
INSPECTION AND TEST
1 GENERAL
1.1 Each engine shall be tested at manufacturer’s workshop to
certify the engine output and fuel consumption in accordance with
the site operating condition specified by purchaser on the
specification datasheet.
1.2 All relevant information drawings pertinent to the testing and
test procedure shall be transmitted to the purchaser in advance of
the test date notification.
1.3 The purchaser shall call for additional testing if test results
are unsatisfactory or marginal. Any equipment rejected shall be
repaired or replaced to the purchaser’s satisfaction and tests
shall be repeated.
1.4 Any unsatisfactory material, equipment, installation, or
workmanship shall be replaced or repaired to the purchasers
satisfaction at the manufacturer’s cost.
1.5 The engine and generator shall be tested individually in
accordance with relevant standards specified above.
1.6 The completed and individually tested engine and generator
shall be assembled onto the base plate with all auxiliaries,
instruments and controls for a complete test of the generator set.
OEM Service:
Guangdong Sunkings Electric Co., Ltd. Can provide professional OEM
Service for customers.
1. Unique design and manufacture of generator according to
customer’s requirement.
2. Customer logo printing or painting on the genset.
3. Installation and Operation manual neutral or headings can be
design according to customer’s requirement.
4. Full warranty cover to support the customers.
